General Broach Company and Chemtool Incorporated have a lot in common. General Broach of Morenci, Michigan, is a leader in the manufacture of spiral gullet and button gullet broach bars. Chemtool Incorporated is an innovative Specialty Chemical  supplier, headquartered in Rockton, Illinois. General Broach Company started in the 1940's but moved its tooling operation to Morenci Michigan in 1964. Both companies were started in the early 1960's, and both companies have diversified their product lines over the years. Each company was designated as the first in their industry to become a Ford Q-1 supplier, and both were one of the first in their respective industries to become ISO 9000 certified. Recently, they combined their efforts to improve the grinding process at General Broach.

Five years ago 90% of General Broach Company's business was automotive related. General Broach supplied broaches to cut the internal, external and blind splines for gears that go into automotive power-train parts. Because of the climate in the automotive industry, they knew they had to diversify. Today General Broach has refocused their production emphasis to aerospace customers and other OEM manufacturers of off road equipment, agricultural equipment, firearms and hand tools. They manufacture broaches from 0.300 to 8.5 inches in diameter and up to 96 inches in length to meet their customer demands.

Chemtool Incorporated also had a number of automotive customers. They also faced a similar shift in business strategy. In response to the oncoming trend, Chemtool Incorporated developed the NuSol®  line of cutting and grinding fluids. NuSol®  is a patent pending technology that was developed without the use of a traditional emulsification package that is found in petroleum oil based products.  NuSol® utilizes high molecular pre-formed emulsions for superiour boundary lubrication.  NuSol®  also incorporates a heavier, more viscous base oil to improve tool life, corrosion control and boundary lubrication. In typical metalworking fluids, the emulsifier package is what breaks down in the fluid over time and that leads to rancidity, mist, heavy residues, coolant splitting, corrosion and the loss of tool life.

General Broach grinds three different types of steel alloy material: M4, M2 and T-15. Once material was delivered, the lathe department trims them to a desired diameter. The bar are then hardened in a salt-based  heat treat operation reaching 100 F. The treating process can take up to three weeks. The bars temperature needs to be brought up slowly so that both the inner and outer cores of the broach bar reach a hardness of 64-66 Rockwell C. After the bars are hardened, they are ground with vitrified CBN wheels taking off as much as 0.100 “per pass.

General Broach had experienced coolant splitting problems due to the hardness of the plant process water.  This problem had occurred with all three water soluble coolants they used prior to installing NuSol®. The splitting problems translated into stress cracking and burn marks on the broach bars they were grinding.

There was a small percentage of finished broach bars with stress cranks and burns. However, because of these problems, General Broach had to slow their grinding process (grinding at a slower speed and also reducing the amount of stock that was removed on each pass) to insure the integrity of the part.

Extra measures by the machine operator also had to be taken to ensure the concentration of coolant remained at the proper level to maintain a tight emulsion with the old coolants.

The coolants prior to NuSol®  also experienced microbiological residue which resulted in clogged filters causing rapid indexing of the filter paper. They had to constantly add coolant to keep the concentrate up and the emulsion as tight as possible.

Because of the myriad of coolant problems, General Broach was excited to evaluate NuSol®. They prefer to use coolants that contain mineral oil because of the increase in lubricity for their part finishes and for increased depth of grind. Mineral oil also increases speed and feed rates over synthetic coolant technology.

Once NuSol® was installed and operating, Larry Stover, and machine operator Paul Bieber found the following benefits of NuSol®:

The introduction of NuSol into the General Broach system has led to an increase of 20% to their production. They are no longer concerned about the burning or stress cracks of the broach bars they manufacture. They felt more comfortable increasing their feed rate, which translated into an additional 15% more production.

They have been able to grind off more stock on each pass. Additionally, Larry felt the surface finish was superior to anything they experienced prior to NuSol®.

An added benefit is that NuSol® runs cleaner and does not go rancid as their previous coolants had.

Today General Broach utilizes Nusol® 21 High Performance in their grinders and Nusol 21 Ultra Max 2 in their broaches.

NuSol® is also less expensive to run at General Broach because operators are not continually adding coolant into their system. They have reduced coolant consumption by 30 percent because they do not dump their sumps as often and they had and they use less make-up coolant concentrate on a daily basis.

Both companies have continued to grow year after year because of their innovation and constant drive for improvement and remain leaders in their respective industries.

For more information on NuSol® contact Sales at 815.957.4140 or by e-mail sales@chemtool.com.