Corrosion Inhibitors


Market Served



Product Description

WeRP 6 provides the high performance of conventional solvent/oil based rust preventatives without the flash/flame, safety, or housekeeping liabilities associated with them. WeRP 6 is a 10% solids, low VOC, non-toxic synthetic surfactant blend that deposits an ultra-thin uniform film when cured. The product is nonflammable and can easily be cleaned with detergent and hot water. The product is as thin as a solvent, yet it contains no solvent or mineral oils and is readily biodegradable. When fully cured, the thin film exhibits excellent high humidity protection. WeRP 6 is formulated with a multi-metal package to inhibit corrosion on yellow metals and to prevent magnetite corrosion due to stacking parts. Optimal coverage is as received in a dip tank, flow coating, or when brushed or sprayed using an airless or pneumatic spray gun. WeRP 6 is formulated with an optimal blend of preservatives to extend shelf life. WeRP 6 is an excellent choice for the last stage of a washer, as it will help disperse dirt while coating the parts with a near-imperceptible film. In many instances the product is paintable as in the benchmarking study done next page.

Featured Benefits
  • Extremely low foaming characteristics ideal for high pressure washers
  • Contains a preservative for maximum sump life yet is biodegradable
  • Imperceptible thin film corrosion preventative offers superior rust protection and weldable surface
  • Lean concentrations assure low consumption and cost effectiveness
  • High detergency/surfactant package providing added cleaning power beyond alkalinity
  • Contains no phosphates, nitrites, or silicones
Typical Properties
Appearance Creamy colored emulsion
Film Type Non-sticky, near imperceptible
Flash Point, COC Non-flammable
Fluid Type Alkaline spray cleaner
Foaming Characteristics None
Freeze-Thaw Pass
Odor Mild amine
pH 10
Solids 11%
Specific Gravity, 60°F (15.6°C) 0.99
Weight, lb-gal., 60°F (15.6°C) 8.23