Straight oil metalworking fluid


Market Served



Product Description

Lubridraw 3305-WX is medium to heavy duty completely emulsifiable drawing oil concentrate. It is very stable in hard and soft water. Lubridraw 3305-WX is designed for severe drawing and blanking operations on cold rolled steel and stainless steel along with non-ferrous metals such as copper, brass, and aluminum. Its unique sulfonate free chemistry provides bacteria resistant fluid that will not go rancid. In heavier dilutions with water, Lubridraw 3305-WX is suitable for a variety of blanking, forming, stamping, and piercing operations on cold rolled, hot rolled, and stainless steels, particularly in high speed eyelet machine stamping operations. The product may be flooded, sprayed, brushed, or rollcoated on the blanks or coil stock entering the press. Typically, Lubridraw 3305-WX is run between 5-15% depending on the severity of the draw. Lubridraw 3305-WX emulsifies easily in tank side proportioning units and will not leave a heavy waxy buildup on the dies or parts.

Featured Benefits
  • Easily washed off for post machining applications
  • Sulfonate free chemistry yields rancid free residues
  • High level of lubricity makes the product ideal for a multi-purpose work horse in one facility
  • Low foaming and easily emulsifiable for proportioning units
  • Superior corrosion protection
Typical Properties
All Metal Safe Yes
Appearance Opaque emulsion
Compatible Metals Copper
Compatible Metals Titanium
Compatible Metals Stainless Steel
Compatible Metals Bronze
Compatible Metals Ferrous
Compatible Metals Inconel
Compatible Metals Brass
Compatible Metals Aluminum Alloys
Flash Point, COC 335°F (168.3°)
Fluid Type Drawing oil
Machining Capabilities Medium-Duty Stamping
Odor Mild
pH (10% dilution) 9.5
Specific Gravity, 60°F (15.6°C) 1.01
VOC, ASTM 1868 48.7 grams/liter
Weight, lb-gal., 60°F (15.6°C) 8.40 lbs/gal.