Straight oil metalworking fluid


Market Served



Product Description

Lubridraw 3320 is heavy duty, completely emulsifiable drawing oil concentrate. It is very stable in hard and soft water. Lubridraw 3320 is designed for the most severe drawing and blanking operations on cold rolled steel and stainless steel along with non-ferrous metals such as copper, brass, and aluminum. In heavier dilutions with water, Lubridraw 3320 is suitable for the most severe blanking, forming, stamping, and piercing operations on cold rolled, hot rolled, and stainless steels particularly in high-speed eyelet machine stamping opera-tions. It may be flooded, sprayed, brushed, or roll-coated on the blanks or coil stock entering the press. Typically Lubridraw 3320 is run between 5-15% depending on the severity of the draw. Lubridraw 3320 emulsifies easily in tank side proportioning units and does not leave a heavy waxy buildup on the dies or your parts. Lubridraw 3320 can be diluted with any lower viscosity diluent oil such as hydraulic oil, spindle oil, EDM oil, or solvent for less severe drawing or stamping requirements.

Featured Benefits
  • Easily washed off for post machining applications
  • High level of lubricity makes it ideal for a multi-purpose workhorse in one facility
  • Low foaming and easily emulsifiable for proportioning units

Super-compliant for California Rule 1144

Typical Properties
Appearance Amber
Compatible Metals Brass
Compatible Metals Stainless Steel
Compatible Metals Ferrous
Compatible Metals Aluminum Alloys
Compatible Metals Copper
Flash Point, COC 335°F (168.3°C)
Fluid Type Drawing oil
Odor Mild Petroleum
pH (10% dilution) 9.5
Specific Gravity, 60°F (15.6°C) 1.14
VOC, ASTM 1868 69.7 grams/liter
Weight, lb-gal., 60°F (15.6°C) 9.49 lbs/gal.