WATER EMULSIFIABLE HEAVY DUTY DRAWING LUBE
CT 3363 is a viscous yet completely emulsifiable drawing oil concentrate. It is very stable in hard and soft water. CT 3363 contains a chlorinated extreme pressure additive and is designed for the most severe drawing and blanking operations on cold rolled steel and stainless steel as well as non-ferrous metals such as copper, brass, and aluminum.
For less severe drawing or stamping requirements, CT 3363 may be diluted with any lower viscosity diluent oil such as hydraulic oil, spindle oil, EDM oil, or solvent. In heavier dilutions with water, CT 3363 is suitable for the most severe blanking, forming, stamping, and piercing operations on cold rolled, hot rolled, and stainless steels, particularly in high-speed eyelet machine stamping operations. CT 3363 may be flooded, sprayed, brushed, or roll- coated on the blanks or coil stock entering the press.
|Falex EP Extreme Pressure Lubricity Test||4500+ lbs. @ 60 lbs/inch Torque|
|Flash Point, COC||335°F (168.3°C)|
|Fluid Type||Drawing lube|
|pH (10% dilution)||9.0|
|Specific Gravity, 60°F (15.6°C)||1.130|
|Viscosity (100°F)||1400 – 1700 SUS|
|Weight, lb-gal., 60°F (15.6°C)||9.47 lbs/gal.|